power entry modules without line filter kp (fh) www.schurter.com/pg0 5 connectors iec appliance inlet c14 with fuseholder 1- or 2-pole inlet with fuseholder (5x20 mm) kpf filter module (not enclosed) medical fuse drawer c14 70 c description - panel mount: sandwich/rear-side - 2 functions: appliance inlet protection class i, fuseholder for fuse-links 5 x 20 mm 1- or 2-pole - for pcb mounting - alternative: version with line filter kp f ; kp s approvals - vde license number: 40008635 - ul license number: e93617 - csa license number: 38456 characteristics - panel mount from rear or "sandwich" between top and bottom/side to side panels pcb mount with snap-in or screw-on feet (self tapping screws ? 3 x 8 mm) - all single elements are already wired - fuse drawer meets requirements of medical standard iec/en 60601-1 the fuse drawer can only be opened with the aid of a tool the fuseholder is accessible from the equipment front - insulation cover on the rear-side - qualified for use in equipment according iec/en 60950 other versions on request - solder terminals - quick-connect terminals - for protection class ii references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 10 a / 125 vac; 60 hz dielectric strength > 2.3 kvac between l-n > 2.8 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal for pcb mounting quick connect termi - nals 4.8 x 0.8 mm solder terminal on request panel thickness s snap-in: 1.5/2/2.5/3 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder 1 or 2 pole, shocksafe category pc2 acc. to iec 60127-6, for fuse-links 5 x 20 mm rated power acceptance @ ta 23 c 5 x 20: 2 w (1 pole)/ 1.6 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves
power entry modules without line filter kp (fh) www.schurter.com/pg0 5 connectors dimensions 56.1 mm screw on pcb mounting 52.1 2 2 56.1 ? 5.9 1.1 1.3 20.2 6.2 0.8 1.3 1.1 2.5 18.5 36.5 4.5 a r 2 32 36 2 2 27.8 31.2 50.1 53.34 16 s 0.1 a = for pcb-thickness 1.2/1.6/2.0/2.4 mm additional quick connect terminal 4.8 x 0.8 mm snap-in mounting 52.1 2 2 56.1 ? 5.9 1.1 1.3 20.2 6.2 0.8 1.3 1.1 4.5 18.5 36.5 4.5 1.6 r 2 32 36 2 2 27.8 31.2 50.1 53.34 16 s 0.1 0 -0.1 0.1 2.9 additional quick connect terminal 4.8 x 0.8 mm s = panel thickness for 2-pole inlet/switch, 2-pole inlet fuseholder and inlet/outlet x 0.1 10.16 7.62 27.94 25.4 13.97 53.34 (16.45) s 0.1 3.82 d1 d2 d2 1.6 +0.1 0 d1 7.55 5.08 for combinations: inlet/switch 1-pole inlet/ fuseholder 1-pole 10.16 10.16 25.4 1.6 +0.1 0 s and x see mounting holes mounting holes for backside moun - ting 52.4 32.3 0.1 0.1 sandwich mounting holes x 32.3 0.1 0.1 18.5 x = 48.4 at s = 1.5 and 2.5 x = 50.4 at s = 2.0 and 3.0 sandwich mounting holes x 32.3 0.1 0.1 x = 48.4 at s = 1.5 and 2.5 x = 50.4 at s = 2.0 and 3.0 dimensions stable snap feet requires minimal insertion force module must lay flat on the pcb when soldering screw-on mount uses self-tapping screws
power entry modules without line filter kp (fh) www.schurter.com/pg0 5 connectors insertion from behind "sandwich" mounting with split enclosure panels other dimensions as for 2-poles d1 = 6 0.05 for (snap-in) d1 = 3.6 (screw-on) d2 = 2 0.1 (screw-on) dimensions without tolerance: 15 = 0.05; 15 = 0.1 diagrams inlet with fuseholder (5 x 20 mm) variants panel mounting panel thickness s [mm] pcb [mm] line switch fuseholder connector order number screw 2 1.2/1.6/2.0/2.4 - 1-pole - kp01.1452.01 screw 2 1.2/1.6/2.0/2.4 - 2-pole - kp01.1352.01 screw 3 1.2/1.6/2.0/2.4 - 1-pole - kp01.1453.01 screw 3 1.2/1.6/2.0/2.4 - 2-pole - kp01.1353.01 snap-in 2 1.6 - 1-pole - kp01.1412.01 snap-in 2 1.6 - 2-pole - kp01.1312.01 snap-in 3 1.6 - 1-pole - kp01.1413.01 snap-in 3 1.6 - 2-pole - kp01.1313.01 type kp without cover: kp01.xxxx.xx90 ground terminal with solder pin: kp01.xxxx.x3xx packaging unit 50 pcs mating outlets/connector s category / description appliance outlet overview complet e iec appliance outlet f, screw-on mounting, front side, solder or quick-connect terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outlet further types to kp (fh )
power entry modules without line filter kp (fh) www.schurter.com/pg0 5 connectors connector overview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connector further types to kp (fh ) ... power cord overview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cord further types to kp (fh ) ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|